 |
| 1. Sketch the parts needed for the body. |
 |
 |
| 2. Use an electric saw to cut the wood. |
 | |
| 3. Use wood glue to build the body. |
 | |
| 4. Drill 4 holes on the tip. After this, insert the tuning pegs. |
 | |
| 5. Insert the strings on the tuning pegs. Use 4 nails on the the bridge, these nails should not be fully pressed down because it'll be used for the strings. |
 |
| 6. Use toothpicks to make the fretboard. After this tie the strings on the nails properly and tune it. |
-Christian Encarnacion
No comments:
Post a Comment