materials:
- saw
- wood
- drill
- screws and screw driver
- tape measure/ ruler
steps:
1)measure and cut wood into desired lengths; cut two 16-inch wood for the frame
2)start assembling the keys and position them over the frame
3) drill holes on the keys 2/9 of the way down and screw them on to the frame
4) loosen/ tighten screws as you go to "tune" the keys
5) optional: to prevent the frame from "wiggling" add extra pieces of wood on the back for support
6) tune and play.
7) have fun! (:
No comments:
Post a Comment